Since their creation Kevlar and Dyneema have been rivals in the string knit glove world. You’ve already probably have heard about these fibers’ weight-to-strength ratio before. Kevlar has stated that it is 5 times stronger than steel and Dyneema 15 times stronger. Yet their tensile strength are similar the Dyneema has a lighter density and thus it has achieved a better strength to weight ratio.

Dyneema vs Kevlar: Bulletproof

Although Dyneema has proven to be a high-strength synthetic fiber that protects you or a vehicle from dangers like IEDs (improvised explosive device) or even shots from an AK47. There have been many researches for these two materials to achieve the most flexibility and protection.

Ballistic tests have been done and have indicated that the single-phase Kevlar panels was fairly more energy absorbent than the low areal density of fabric panels of Dyneema. The optimal ratio of the two fabrics was found to be 1 to 1 as the two materials had an improvement of 16% when the Kevlar was placed close to the impact face and Dyneema placed towards the back.

 Dyneema vs Kevlar: Cut Resistant

As we mentioned above both materials have similar strength. Hardness doesn’t play a role here cause it relates to engineered yarns and it isn’t applicable here. The material moves in a rolling action when a sharp object slides across the “fabric”. And the amount of rolling depends on the gauge of the material.

The noticeable difference is seen in the slickness of the material.  If you hold Dyneema and Kevlar in both hands it is clear that Dyneema has a softer, smoother feel. Dyneema has been used for gloves to make them cut resistant for the food industry and has been proven to comply with strict requerements in the framework regulation of materials as well as in the good manufacturing practice.  Therefor Dyneema having an edge over Kevlar.

Dyneema vs Kevlar: Abrasion

Dyneema Enhanced fabric would endure abrasion far better than Kevlar in the most challenging of conditions. Its tear resistance is 5 times higher compared to other material combinations while using half of the amount of synthetic yarn. Adding only 5-10% Dyneema to another material results in up to 200% improvement in tear and abrasion resistance.

Whereas Kevlar isn’t the ideal material against abrasion. As Kevlar experiences fatigue from abrasion on almost 100,000 cycles while Dyneema at almost a 1,000,000.  With a flex life performance of 12 Kevlar tends to break and crack after extended use . Yet Dyneema with a flex life of around 100 will keep its strength and can be fitted even after extended use.

 Dyneema vs Kevlar: Heat Resistance

When it involves conforming in your body, each of those high-strength fibers will do the activity nicely. But for retaining cool on a warm summer time season day, Dyneema and its excessive overall performance polyethylene (HPPE) cousin TenActiv, offer unbeatable comfort.

HPPE fibers live cool towards the pores and skin and do now no longer entice air, permitting your pores and skin to breathe. HPPE additionally does now no longer take in water because of this that it’s going to wick moisture and sweat off from your pores and skin.

While nonetheless being snug to wear, Kevlar® won’t allow your pores and skin breathe as nicely and has a tendency to take in moisture. Kevlar, with a heat conductivity of .04 w/mk, has a tendency to insulate warmth unlike Dyneema, with a heat conductivity of 40 w/mk, which disperses warmth quickly. Kevlar is consequently better for cold climates whilst Dyneema provides most comfort throughout warmer climates.

 FAQ:

Is Spectra stronger than Kevlar?

Spectra is a tremendous fiber that’s very robust and sturdy. it has super low stretch, and is lightweight enough to float. Spectra has the most effective fatigue lifetime of any fiber. The sole drawback with Spectra is slow stretching. Underneath steady high masses, Spectra can elongate very slowly. After an amount of time, you would possibly notice that your halyard currently looks a reasonable amount looser. Using a size larger material can greatly scale back creep, however it may still be noticeable. Spectra is the best material for high fatigue and light-weight sheets. Spectra doesn’t absorb liquids, and it keeps it lighter.

Can Dyneema stop a bullet?

Dyneema has the ability to defend against a variety of threats such as direct gunfire from an AK47, IED’s, RPG’s, land mines or EFP’s. Comparing it to armor plating, protective gear made with Dyneema that has a metal or ceramic strike plate is 50 to 75% much less dense than metal armor. Because it’s far lighter and moldable a vehicle geared up with Dyneema would not need to give up maneuverability or design.

Is Aramid the same as Kevlar?

Aramid is basically another name for synthetic fibers that are heat-resistant and strong. They are commonly used in army and aerospace applications for body armor materials and  composites. The chain molecules in the material are highly oriented along the fiber. Thus a bigger proportion of the chemicals provides higher fiber strength than other synthetic fibers.

How strong is Dyneema?

Dyneema is 15 times stronger than steel wire on a weight to weight basis. With minimum weight it scores higher on scales than other high strength materials with a tensile strength up to 43 cN/dtex. Dyneema also has a very high chemical and  UV resistance. Thus strong yet lightweight Dyneema is most commonly used as ropes in construction and outperform other synthetic ropes with its outstanding bending performance that’s even better than specialty steel wires.

How expensive is Dyneema?

Materials mate from completely Dyneema are very expensive and are known as Full Dyneema or Full Spectra. Its is commonly used to create almost indestructible backpacks or camping materials. Although its not the lightest material to be used in this area. A cheaper variant is used in some other products called Dyneema grid whereas Dyneema fibers are woven into another material to make it more durable.

How long does Dyneema last?

Having many resistances, Dyneema infused and full Dyneema materials tend to last longer than other counterparts in the field. With its outstanding weight-to-strength ratio and tensile strength it is very well on top for being used from by professional mountain climbers to sailing and having military applications.

Is Dyneema waterproof?

Dyneema is a waterproof material that doesn’t absorb liquids like other woven fabrics and nylon. This makes it perfect for producing tents, tarpaulin and backpacks. While Dyneema is 100% waterproof by itself, stitching creates small holes in any material. For example while some backpack companies try to seal every seam on the pack it still should be treated as regular bag.