Cut-Resistant Gloves – For The Maximum Cut Protection

Cut-resistant gloves have gradually become part of the work of workers. Because hand injuries are one of the main reasons for emergency room visits and lost work. The two most common hand injuries are cuts and tears, making cut protection an important issue in today’s safety management. There is a unique set of hazards and environmental factors in every workplace, so it may be difficult to determine the most appropriate glove choice for each worker.

Question 1: What measures can be taken to protect workers from harm?

Photo of anti-cutting gloves

The use of protective gloves, especially those designed to provide cut protection, is a common method. As the designer and manufacturer of cut-resistant gloves, we will consider factors such as cut-resistant yarn, tear resistance and abrasion resistance of knitted fabrics. In addition, we consider other attributes such as grip performance and dexterity as important aspects of cut protection.

In addition to cut-resistant gloves, cut protection includes other factors unrelated to protective clothing, such as machine protection, workplace settings, working conditions, and worker training. Gloves are equally important to us and are often seen as the last line of defence. The head of the security department should make every effort to ensure that the hands of the workers are not at risk.

Question 2: What factors need to be considered when choosing the desired degree of protection against cuts? Isn’t it simply to choose the highest level cut-resistant gloves?

It is not enough to deal with just one symptom. In the case of a cut, it is not just a matter of raising the level of protection of the glove, but the root cause needs to be determined.

Is it due to sharp objects, poor grip, inadequate gloves, or worker fatigue? Many other factors can cause cuts. It is important to fully assess the hazard and choose the right glove. Injury is often caused by improper selection or a lack of understanding of the wearer’s needs.

Photo of anti-cutting gloves

Therefore, when choosing cut-resistant gloves, you really can’t simply choose the highest level, but you need to consider the following factors:

  1. Usage scenarios: Different usage scenarios require different levels of cut protection. For example, a higher level of cut protection may be required in industries such as construction or agriculture, while a higher level of protection may not be required in an office environment.
  2. Material and process: Different materials and processes also have a significant impact on the performance of cut-resistant gloves. For example, some materials are inherently tough to cut, while some processes can enhance a material’s cut resistance.
  3. Cost: The higher the level of cut-resistant gloves, the higher the cost will usually be. Therefore, when choosing cut-resistant gloves, you need to consider whether their cost is in line with your budget and needs.
  4.  Comfort: Higher levels of cut-resistant gloves may mean thicker materials or more complex designs, which may affect comfort. Therefore, when choosing cut-resistant gloves, you also need to consider whether their comfort meets the requirements.

To summarize, when choosing cut-resistant gloves, you need to consider several factors such as usage scenarios, material and workmanship, cost and comfort, rather than simply choosing the highest level.

Question 3: In 2016, the EN 388 safety standard was significantly updated. What new situations are there and what does this mean for people who choose protective gloves?

en388 2016 standard

Since the first standard in 1994 and the previous standard in 2003, technology has grown considerably. New engineering yarns (glass fibre, stainless steel, etc.) have made the standards for cut-proof test methods inconsistent and unreliable, with high variability between different laboratories and even in the same laboratory. Therefore, new test methods are urgently needed.

When testing for abrasion resistance, the sandpaper specified in the old standard has been discontinued, which has resulted in the use of a large number of different wear-resistant papers, resulting in inconsistent results. The latest revision of this standard defines a new type of wear-resistant paper that enables the laboratory to test reliably and consistently.

A trend has recently emerged in which a buffer layer is used as an anti-glove protection function. Because of the inability to continuously test the effectiveness of these buffer layers, cut-resistant glove manufacturers began claiming that their products had this capability without any verifiable testing. To illustrate this more clearly, an impact test was developed. The gloves that passed this test can make a statement.

Finally, the introduction of the new EN ISO cut-off test may have the greatest impact on the industry. This test is especially useful for cut-proof materials that will passivate the blades used in the cutting test. Now, glove manufacturers can perform two cut-proof tests. Security managers need to understand how these tests work and what they mean for the wearer.

Question 4: Sometimes people say that leather is the best body protection material. What materials on the market are now facing major cut-proof challenges?

Photo of anti-cutting gloves

Leather is far from the ideal cut-proof material. As a natural product, this material has inconsistencies. It is difficult for manufacturers to use leather to provide cut protection. Finally, leather is just skin – so there is no point in using animal skin to protect human skin.

Many yarns are now available to provide a high level of protection. The most effective yarns are blended or engineered yarns. For example, para-aramid is five times stronger than steel, and high-performance polyethene (HPPE)is three times stronger than para-aramid. These materials are very comfortable and have excellent dexterity. Not only can we design, test and manufacture gloves with these yarns, but we also offer high levels of long-term reliable cut protection.

Question 5: What are the important factors when evaluating cut protection and cut-resistant glove selection?

Grip performance – The importance of obscuring objects when they are considered to pose a greater threat when moving. A firm grip with an appropriate cut-off rating significantly reduces the risk of injury. Preventing slippage and reducing the required grip force while performing a task provides more control to the wearer.

Products that provide “cut-proof performance” and “cut-proof protection” do not completely prevent or eliminate the possibility of cuts or punctures, and are unsuitable or untested to protect electric blades or other sharp or rotating equipment. Users should always be careful when handling sharp materials.

THE BEST CUT-RESISTANT GLOVES ARE RECOMMENDED HERE.

WHAT ARE THE DIFFERENT LEVELS OF CUT-RESISTANT GLOVES?

Facebook
Twitter
LinkedIn
Pinterest
Email

comment

Translate »