15 Types Unqualified Rubber-Coated Glove For Quality Inspection

After the dipping protective gloves are finished, our quality inspectors will check the quality of the rubber-coated gloves. So what kinds of common unqualified situations are there? In this article, we will focus on the unqualified types of dip gloves.

The following introduces 15 types of quality problems with rubber-coated gloves::

1. The bubble on the coating

2. The connection

3. The coating crinkles uneven

4. The dipping position is not reasonable


5. Dirty on the Rubber-Coated Glove

6. Extra fiber

7. Rubber flow trace

8. Hole in Rubber-Coated Glove

9. The leak of the rubber

10. Rubber bean

11. Rubber penetrate

12. Extra rubber

13. Impurity

14. Needle hole

15. Unsmooth

What causes rubber-coated gloves to have these quality problems?

The quality problems of rubber-coated gloves may be caused by a variety of factors, the specific reasons may include the following:

  1. Poor quality of materials: the poor quality of the glue coating materials used in the gloves may affect their adhesion, abrasion resistance and durability.
  2. Process problems: In the manufacturing process of gloves, there may be problems such as poor process control and irregular operation, leading to unstable quality of gloves.
  3. Unsuitable formula: The unsuitable formula of adhesive coating used for gloves may lead to poor performance of the coating layer, such as poor adhesive force, poor abrasion resistance, etc.
  4. Poor storage conditions: If the gloves are subjected to high temperature, high humidity and other adverse conditions during the storage process, it may lead to the ageing of the adhesive layer, peeling and other problems.
  5. Poor use environment: gloves may be affected by various environmental factors during use, such as temperature, humidity, chemical substances, etc. These factors may affect the performance and life of the adhesive coating layer.

The above are some common reasons that may lead to the quality problems of rubber-coated gloves, to solve these problems, we need to start from many aspects, including strict control of the quality of raw materials, optimising the manufacturing process, adjusting the formula, improve the storage and use of the environment and so on.



Translate »